Models we stock:

360 Range

Hudson Commando/Constructo sprayers

Hudson Industro Sprayers

Robust and rugged containers with continuous spraying.

The container is easily filled through a funnel shaped opening. It can be pumped to working pressure in just two minutes using the built in seamless brass air pump. One charge will spray all the contents of the container. Spray is controlled through trigger controlled valve for one handed operation. No pumping is required while spraying. These sprayers find many uses in horticulture, agriculture, in construction work and industry.

They may be used with insecticides, fungicides, weed killers, foam release oils, cement curing compounds, metal cleaning solvents cleaning & maintenance solutions.  WARNING: These sprayers are not suitable for use with acids or alkalis

Four models are available with choices of capacity and with mild steel or stainless steel containers.

Special features:

• Pressure gauge - working pressure marked in red
• Safety valve - to prevent over pumping
• Instant on/off trigger control valve
• Brass adjustable spray nozzle

x = SG for stainless steel container
x = G for mild steel container.  (The mild steel outfit should not be used with Bordeaux mixture, copper based fungicides or creosote.)

3.5 l sprayer: A smaller capacity 3.5 l sprayer is also available.

Special uses

Acids and solvents: These sprayers are also available equipped with Viton washers making them suitable for use with acids and solvents.
Carpet cleaning: A sprayer for use with carpet cleaning chemicals has quick release fittings to enable the user to switch from the standard trigger valve with lance and non-drip fan nozzle for spraying carpets to a trigger gun for use on upholstery.

Hudson Commando/Constructo Sprayers

Two models are available in this range of economical and rugged sprayers.

96303 Commando

• 10 litre
• Galvanised steel
• Viton Seals
• plastic pump
  
• 1.2 m of braided hose
• brass trigger release valve
• 45 cm extension lance
• adjustable nozzle.

91063 Constructo

• 10 litre
• Galvanised steel tank, epoxy coated inside and out for extra protection.
• Brass pump unit.
• Viton gaskets and seals
• 1.2 m of braided hose
• brass trigger release valve
• 45 cm extension lance
• adjustable nozzle.

Hudson Sprayers are manufactured in the United States by one of the worlds' leading sprayer manufacturers. Find out more at: http://www.hdhudson.com

97291 4 Litre sprayer

Commercial multi-Use Sprayers 97291, 97291

Rugged for every day commercial alllication of carpet spotters, wallpaper remover, disinfectant, sealers, etc. on walls and floors.

Stainless steel tanks, chemical resistant viton gaskets and seals, extra long power sprayer type hose, steel handle. Heavy duty brass Thrustless controll valve with 6" in-line strainer, long brass wand. spraying systems Co. 8004E Tee Jet nozzle tip makes these models the ultimate in professinal spraying equipment. Avalable in 4 and 8 litre sizes.

Hudson Industro 91003/91004

Hudson industro 91704

Hudson Industro Sprayers

Three models are available in this range Dependable high performance sprayers.

91003

• 10 Litre
• Viton Seals
• Powerfull brass pump and steel pump handle
• Goodyear brand hose formulated for solvent-based cures,
• Tank is galvanized steel with Endurall epoxy coating inside and out
• Fills without removing pump
• Pressure release built into filler lid

91004

Same great features as 91003 with a 14 litre tank

91704

Same great features as 91004 with stainless steel tank and viton Extreme gasketsand seals.

Hudson Sprayers are manufactured in the United States by one of the worlds' leading sprayer manufacturers. Find out more at: http://www.hdhudson.com

Accessories

A full range of accessories is available which fit most of our sprayers.

Please contact us if you would like to purchase any of our sprayers.